Safety Rope Switches - Grab Wire Safety Rope Switches

Heavy Duty GuardianLine Left/Right - Type GLHL/GLHR - 125m

The GLHL/R is a robust die-cast Heavy Duty Safety Rope Pull switch designed to protect long conveyor lengths were protected is required up to 125m using two switches or up to 100m using a single switch. The die-cast housings are robust to survive indoor or outdoor use. A bi-colour LED ensures switch status can be seen easily from a distance. They have 4NC 2NO contacts to ensure flexibility with all modern control applications and optional Explosion Proof contact blocks are available. They can be used to compliment the GLHD versions at each end of the rope span.

Heavy Duty GuardianLine   Left/Right - Type GLHL/GLHR - 125m

Part No Type Conduit Contacts Fittings
141005 GLHL 4 x M20 4NC 4NO LED & E Stop
141006 GLHL 4 x M20 4 x 1/2" NPT LED & E Stop
141007 GLHLEx 3m. 4 core EX 1NC 1NO E Stop
141009 GLHR 4 x M20 4NC 4NO LED & E Stop
141010 GLHR 4 x M20 4 x 1/2" NPT LED & E Stop
141011 GLHREx 3m. 4 core EX 1NC 1NO E Stop
141015 GLHLEx 3m. 4 core Ex 3NC 1 NO E Stop
141016 GLHREx 3m. 4 core Ex 3NC 1 NO E Stop
141019 GLHLEx 3m. 4 core Ex 2 NC E Stop

Mini Duty GuardianLine - Type GLM - 50m

The GLM a compact yet robust die-cast Mini Duty Safety Rope Pull switch designed to protect short conveyor lengths were protection is required up to 50m using two switches or up to 30m using a single switch. They provide reliable, cost effective safety solutions for conveyor systems and can be enhanced by adding external mushroom type E Stop at the switch or bi-colour LED available to show switch status from a distance. They have a choice of 3 or 4 pole contacts to ensure flexibility with all modern control applications. Rugged integral sealing bellows means they can be high pressure hosed.

Mini Duty GuardianLine - Type GLM - 50m

Part No Type Conduit Contacts Fittings
143001 GLM M20 2NC 1NO
143002 GLM 1/2" NPT 2NC 1NO
143003 GLM M20 2NC 1NO
143004 GLM 1/2" NPT 2NC 1NO
143005 GLM M20 3NC E Stop
143006 GLM 1/2" NPT 3NC E Stop
143007 GLM M20 2NC 1NO E Stop
143008 GLM 1/2" NPT 2NC 1NO E Stop
143050 GLM M20 3NC 1NC  

Standard Duty GuardianLine - Type GLS - 80m

The GLS a General Duty robust die-cast Safety Rope Pull switch designed to protect conveyor lengths were protection is required up to 80m using two switches or up to 60m using a single switch. They provide a reliable general purpose safety solution for conveyors and offer a choice of fittings depending upon the application. They can be supplied with a mushroom type Emergency Stop button which can be fitted to the side of the switch to offer an extra traditional Emergency Stop function close to the switch, or can be fitted later after installation without any extra wiring. A bi-colour LED is available to show switch status from a distance and they have a choice of 3 pole, 4 pole or Explosion Proof contact blocks to ensure flexibility with all modern control applications. Rugged integral sealing bellows means they can be high pressure hosed and the choice of materials makes them suitable for inside or outside use.

Standard Duty GuardianLine - Type GLS - 80m

Part No Type Conduit Contacts Fittings
142001 GLS 3 x M20 2NC 1NO
142002 GLS 3x 1/2" NPT 2NC 1NO
142005 GLS 3 x M20 2NC 1NO LED
142006 GLS 3x 1/2" NPT 2NC 1NO LED
142009 GLS 3 x M20 2NC 1NO E Stop
142010 GLS 3x 1/2" NPT 2NC 1NO E Stop
142017 GLS 3 x M20 2NC 1NO E Stop & LED
142018 GLS 3x 1/2" NPT 2NC 1NO E Stop & LED
142025 GLS 3m 4 core Ex 1NC 1NO  

Heavy Duty GuardianLine Dual - Type GLHD - 250m

The GLHD is a Heavy Duty Rope Pull switch designed to protect long conveyor lengths. The die-cast housings are robust to survive indoor or outdoor use including washdown (IP67 rating). Lengths over 2 Km can be achieved with less than 20 switches. A bi-colour LED ensures switch status can be seen easily from a distance. They have 4NC 2NO contacts to ensure flexibility with all modern control applications and optional Explosion Proof contact blocks are available. Shorter rope spans up to 200m. Can be achieved by using just one switch therefore making a cost effective solution and also reducing wiring runs.

Heavy Duty GuardianLine Dual - Type GLHD - 250m

Part No Type Conduit Contacts Fittings
141001 GLHD 4 x M20 4NC 2NO LED & E Stop
141002 GLHD 4 x 1/2" NPT 4NC 2NO LED & E Stop
141003 GLHD-Ex 3m. 4 core EX 1NC 1NO E Stop
141014 GLHD-Ex 3m. 4 core Ex 3NC 1 NO E Stop
141017 GLHD-Ex 3m. 4 core Ex 2 NC E Stop
141018 GLHD-Ex 3m. 4 core Ex 2 NC 2 NO E Stop

Product enquiry and further information

We would be delighted to offer free application advice, technical information on products, free quotations and delivery information.

Name

Telephone

Product enquiry & further information