Instantaneous Relays

Details subject to change, please contact us for advice and latest specifications.

General purpose auxiliary relays

ARTECHE’s general purpose auxiliary relays are designed to directly operate to the tripping and control circuit. Furthermore, its multiple output contacts permit to use these relays in control, interlocking, timing and signalling applications as well as per direct operation on HV and MV primary equipment.

Auxiliary relays with seismic characteristics

ARTECHE’s auxiliary relays with seismic characteristics are designed to work properly perform under frequent vibration and shock applications, as railway sector, or because of safety requirements as nuclear power plants. The sturdy design of our equipment, with a higher appropriate pressure between contacts, permits to withstand vibrations without penalizing the good performance of the relays.

Auxiliary relays with coil overvoltage protection

ARTECHE’s auxiliary relays, either Vdc or Vac, have the possibility of including an element in parallel with the coil (diode or varistance). In applications with overvoltage, where drop-out time is not important, it is recommended to use diode. Otherwise, varistance is more suitable. These elements are aimed to discharge the energy of the coil when the relay is not longer energized. These relays are indicated when the customer wish to protect the contact of the equipment that commands the operation of our relay, providing a longer durability of the whole protection and control system.

On this page:

General Purpose Instantaneous Relays

RD-2

Applications

  • Operate directly to the tripping and control circuit.
  • Details subject to change, please contact us for advice and latest specifications.

RF-4

Applications

  • Operate directly to the tripping and control circuit.
  • Details subject to change, please contact us for advice and latest specifications.

RJ-8

Applications

  • Operate directly to the tripping and control circuit.
  • Details subject to change, please contact us for advice and latest specifications.

Instantaneous Relays with Seismic Characteristics

RD-2SY

Applications

  • Frequent vibration and shock applications, as railway sector, or because of safety requirements as nuclear power plants.
  • Details subject to change, please contact us for advice and latest specifications.

RF-4SY

Applications

  • Frequent vibration and shock applications, as railway sector, or because of safety requirements as nuclear power plants.
  • Details subject to change, please contact us for advice and latest specifications.

RJ-8SY

Applications

  • Frequent vibration and shock applications, as railway sector, or because of safety requirements as nuclear power plants.
  • Details subject to change, please contact us for advice and latest specifications.

Instantaneous Relays with Coil Overvoltage Protection (I)

RD-2DI / RD-2V

Applications

  • Intended to protect the contact of the equipment that feeds the coil in our relay.
  • Details subject to change, please contact us for advice and latest specifications.

RF-4DI / RF-4V

Applications

  • Intended to protect the contact of the equipment that feeds the coil in our relay.
  • Details subject to change, please contact us for advice and latest specifications.

RJ-8DI / RJ-8V

Applications

  • Intended to protect the contact of the equipment that feeds the coil in our relay.
  • Details subject to change, please contact us for advice and latest specifications.

Instantaneous Relays with Coil Overvoltage Protection (II)

RD-2SYDI / RD-2SYV

Applications

  • Frequent Vibration and Shock applications, as railway sector, or because of safety requirements as nuclear power plants. Intended to protect the contact of the equipment that feeds the coil in our relay.
  • Details subject to change, please contact us for advice and latest specifications.

RF-4SYDI / RF-4SYV

Applications

  • Frequent Vibration and Shock applications, as railway sector, or because of safety requirements as nuclear power plants. Intended to protect the contact of the equipment that feeds the coil in our relay.
  • Details subject to change, please contact us for advice and latest specifications.

RJ-8SYDI / RJ-8SYV

Applications

  • Frequent Vibration and Shock applications, as railway sector, or because of safety requirements as nuclear power plants. Intended to protect the contact of the equipment that feeds the coil in our relay.
  • Details subject to change, please contact us for advice and latest specifications.

Product enquiry and further information

We would be delighted to offer free application advice, technical information on products, free quotations and delivery information.

Name

Telephone

Product enquiry & further information