- Home
- Thermal Management
- Heaters
- Aluminium Foil Heaters - IP68
- Cartridge Heaters
- Cast Heaters
- Ceramic Knuckle Heaters
- Coil Heaters, Coiled Heater Bands and Nozzle Heaters
- Custom Heaters
- Drum Heaters
- Finned Air Heaters
- Flanged Heaters
- Flat Tubular Heaters
- Flexible Tubular Heaters
- Heating Cables, Crankcase Heater
- Immersion Heaters
- Mica Insulated Heaters, Mica Band Heaters, Mica Plate Heaters
- PTC Self-regulating Heating Elements
- Silicone Mat Heaters, Wire Wound, Etched Foil
- Tape Heaters
- Thick Film Heating Elements
- Tubular Heaters
- Temperature sensors
- Temperature controllers
- Products
- Contact
HLP T WITH THERMOCOUPLE
Cartridge Heaters (PDF datasheet)Specials, product enquiry and further information (Contact us form)
General information
All HLP type heaters can be supplied with an integrated thermocouple. Heaters mentioned in the table are available ex-stock. High performance cartridge heaters are especially suitable for internally heated nozzles and heated torpedos where, due to space considerations, a separate thermocouple cannot be installed. The thermocouple is fixed in position, compacted and potential free insulated from the sheath or alternatively connected with the heater sheath.
Execution
Compensating leads can be connected to specified requirements. The thermocouple is galvanically separated from the cartridge sheath unless otherwise specified at the time of ordering. HLPT can also be supplied with an electrical connection between the thermocouple and the cartridge sheath, if so desired.
permissible deviation in K or in % related from the measuring temperature. Reference temperature 0?C.
Integrated thermocouple
Thermocouple at the end of the cartridge heater
Thermocouple insulated
Thermocouple insulated at the bottom end
Technical Data
Construction
As per the types HLP but
Thermocouple
Type J, Type K Color coding according to customer requirements
(IEC 584, DIN 43713, ANSI/MC 96.1)
Type list
High performance heating elements type HLPT can be supplied in diameters from 6,5 to 25 mm and in the corresponding imperial dimensions.
The stock type heaters are equipped with a Fe-CuNi-thermocouple and leads with PTFE insulation type LETEF and compensation leads type LEAUS both with a length of 1000 mm.
Product enquiry and further information
We would be delighted to offer free application advice, technical information on products, free quotations and delivery information.