R 2500 - 4 / 10 / 12 / 16 controller zones

The multi-zone temperature controller R2500 is available with up to 16 control zones. It displays control functions and all key information clearly on its large screen. The modular device can be equipped optionally with different fieldbus interfaces. For international use, the appliance can be operated with 230 V 50 Hz, 115 V 50-60 Hz, 24 V 50-60 Hz and 24 VDC.

  • Multizones (multiloop) Temperature Controller with LCD-Display
  • Controlling and monitoring of 8, 10, 12 or 16 temperature zones.
  • The basic contruction of the new multizones controller R2400 is similar to the relaible R2100 controller. Therefore it´s dimensions, general functions and terminals are compatible to the R2100.
  • The blue LCD-display is very significant for the new controller.
  • With the help of two menues and software controlled function keys it allows a better operation.
  • A builtin recorder function allowes the diagnostic of the process value course.

R 2500 - 4 / 10 / 12 / 16 controller zones

Clarian R2500 (PDF datasheet). Product enquiry and further information (Contact us form).

Product Specification

Input PT100 (RTD)

  • 2- or 3- wire connection possible
  • Built-in protection against sensor breakage and short circuit
  • Sensor current: … < 1 mA
  • Calibration accuracy: … < 0,2 % Linear error: … < 0,2 %
  • Influence of the ambient temperature: … < 0,01 % / K

Input Thermocouple

  • Built-in internal compensation point and protection against sensor breakage and incorrect polarity.
  • Re-calibration not required for a line resistance of up to 50 Ohm.
  • Calibration accuracy: … < 0,25 % Linear error: … < 0,2 %
  • Influence of the ambient temperature: … < 0,01 % / K

External contacts

  • Designed for connecting external potential-free contacts. The contact voltage (approx. 24 V DC, max. 1mA) is provided at controller terminal 75.

Heater current monitoring

  • Measuring input range: 0 … 100mA corresponding 0,0 … 99,9A when using a current transformer 1:1000.
  • If the value of 100mA is exceeded, the controller may be damaged.

Control outputs

  • Bist. voltage signal, 0/18 V DC, max. 10 mA, short-circuit proof or Relay, max. 250 VAC, max. 3 A (resistive load)

Alarm outputs

  • Relay, max. 250 VAC, max. 3 A (resistive load)

LCD-Display

  • Blue STN-display with permanent, white LED-backlight
  • Graphic: 240 x 64 pixel
  • Text: 8 lines with 40 characters each

Data protection

  • EAROM
  • When using a Fieldbus interface please note: Permissible writing operations per parameter must not exceed 1 000 000.

CE-mark

  • Tested according to 2004/108/EG; EN 61326-1
  • Electrical safety: EN 61010-1

Power supply

  • Depends on the version of the device:
    • 230 V AC, +/-10 %, 48 … 62 Hz; approx. 10VA
    • 115 V AC, +/-10 %, 48 … 62 Hz; approx. 10VA
    • 24 V DC, +/-25 %, approx. 10W

Connections

  • Screw terminals, Protection mode IP 20 (DIN 40050), Insulation class C

Permissible operating conditions

  • Operating temperature:
    • 0 … 50°C / 32 … 122°F
  • Storage temperature:
    • -30 … 70°C / -22 … 158°F
  • Climate class:
    • KWF DIN 40040; equivalent to annual average max. 75 % rel. humidity, no condensation

Casing

  • Format, case:
    • 192x96mm, (DIN 43700), installation depth 122 mm
  • Panel cutout:
    • 186 +1,1 mm x 92 +0,8 mm
  • Format, face plate:
    • 198x98mm
  • Material:
    • Noryl, self-extinguishing, non-drip, UL 94-V1
  • Protection mode:
    • IP 20 (DIN 40050), IP 50 front side

Weight

  • Approx. 800g … 1100g, depends on the version of the device

Fieldbus Interface (optically isolated)

  • Depends on the version of the device:
    • Serial: RS232, RS485, TTY (20mA) Elotech protocol, Modbus RTU
    • CANopen, CiA Device Profile DS-404
    • Profibus DP, according to EN 50170

Service Interface (Option):

  • RS485, 115,2 kBaud, 8N1

Subject to technical improvements.

 

Product enquiry and further information

We would be delighted to offer free application advice, technical information on products, free quotations and delivery information.

Name

Telephone

Product enquiry & further information

Clarian UK Ltd

Tel: 01942 620 062
Mob: 07367 200 200

Clarian UK Ltd: Specialists in industrial thermal management were we have many years experience offering well engineered competitively priced solutions.

Manufactures and supplies a large range of electrical and process control components. Including one of the largest ranges of industrial heating elements in the market.

Exclusive UK agent for Turk and Hillinger and Heatfor, two of the world's best known and highly respected manufacturers of industrial heating and silicone mat heating elements and braking resistors.

Clarian UK Ltd. Unit 12 Pagefield Industrial Estate, Miry Lane, Wigan, WN6 7LA. Company No. 05435493 England VAT No. 875743186 Tel. 01942 620 062
Contact Clarian About Clarian Privacy Policy
Copyright © All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. While every effort is made to ensure the accuracy of the information provided, Clarian UK Ltd, Thermal Hire Ltd and its agents cannot accept responsibility for claims made. In Summer 2020 Thermal Hire acquired Clarian UK Ltd.
Web design and hosting by SG7 Media Solutions