MC - Frame Size 1 / Up to 160A

CIRCUIT BREAKER 3 POLE UP TO 160A WITH THERMAL MAGNETIC RELEASE TYPES MC1B-A, MC1N-A, MC1H-A

  • For system and line protection
  • Adjustable overload releaser:I 0,8 – 1 x In (factory setting 0,8 x In)
  • Adjustable short-circuit releasei:I 6 – 10 x In (factory setting 6 x In); except MC.-A40: 8 - 10 x In
  • Box terminals as standard, screw terminals as accessories
  • Breaking capacity 25 / 50 / 100 kA at 415 V 50/60 Hz
  • Meets IEC/EN 60947-2
  • Rated uninterrupted current = Rated current

CIRCUIT BREAKER 3 POLE UP TO 160A WITH THERMAL MAGNETIC RELEASE TYPES MC1B-A, MC1N-A, MC1H-A

RATED CURRENT/ BREAKING CAPACITY

  • SETTING RANGE
    • OVERLOAD-RELEASE (A)
    • SHORT CIRCUIT- RELEASE (A)
  • TYPE
  • ORDER NO.

3 POLE (BASIC BREAKING CAPACITY) 25 kA

  • 20 A/25 kA
      • 15…20
      • fix 350
    • MC1B-A20
    • MC120131
  • 25 A/25 kA
      • 20…25
      • fix 350
    • MC1B-A25
    • MC125131
  • 32 A/25 kA
      • 25…32
      • fix 350
    • MC1B-A32
    • MC132131
  • 40 A/25 kA
      • 32…40
      • 320…400
    • MC1B-A40
    • MC140131
  • 50 A/25 kA
      • 40…50
      • 300…500
    • MC1B-A50
    • MC150131
  • 63 A/25 kA
      • 50…63
      • 380…630
    • MC1B-A63
    • MC163131
  • 80 A/25 kA
      • 63…80
      • 480…800
    • MC1B-A80
    • MC180131
  • 100 A/25 kA
      • 80…100
      • 600…1000
    • MC1B-A100
    • MC110131
  • 125 A/25 kA
      • 100…125
      • 750…1250
    • MC1B-A125
    • MC112131
  • 160 A/25 kA
      • 125…160
      • fix 1280
    • MC1B-A160
    • MC116131

3 POLE (NORMAL BREAKING CAPACITY) 50 kA

  • 20 A/50 kA
      • 15…20
      • fix 350
    • MC1N-A20
    • MC120231
  • 25 A/50 kA
      • 20…25
      • fix 350
    • MC1N-A25
    • MC125231
  • 32 A/50 kA
      • 25…32
      • fix 350
    • MC1N-A32
    • MC132231
  • 40 A/50 kA
      • 32…40
      • 320…400
    • MC1N-A40
    • MC140231
  • 50 A/50 kA
      • 40…50
      • 300…500
    • MC1N-A50
    • MC150231
  • 63 A/50 kA
      • 50…63
      • 380…630
    • MC1N-A63
    • MC163231
  • 80 A/50 kA
      • 63…80
      • 480…800
    • MC1N-A80
    • MC180231
  • 100 A/50 kA
      • 80…100
      • 600…1000
    • MC1N-A100
    • MC110231
  • 125 A/50 kA
      • 100…125
      • 750…1250
    • MC1N-A125
    • MC112231
  • 160 A/50 kA
      • 125…160
      • fix 1280
    • MC1N-A160
    • MC116231

3 POLE (HIGH BREAKING CAPACITY) 100 kA

  • 20 A/100 kA
      • 15…20
      • fix 350
    • MC1H-A20
    • MC120331
  • 25 A/100 kA
      • 20…25
      • fix 350
    • MC1H-A25
    • MC125331
  • 32 A/100 kA
      • 25…32
      • fix 350
    • MC1H-A32
    • MC132331
  • 40 A/100 kA
      • 32…40
      • 320…400
    • MC1H-A40
    • MC140331
  • 50 A/100 kA
      • 40…50
      • 300…500
    • MC1H-A50
    • MC150331
  • 63 A/100 kA
      • 50…63
      • 380…630
    • MC1H-A63
    • MC163331
  • 80 A/100 kA
      • 63…80
      • 480…800
    • MC1H-A80
    • MC180331
  • 100 A/100 kA
      • 80…100
      • 600…1000
    • MC1H-A100
    • MC110331
  • 125 A/100 kA
      • 100…125
      • 750…1250
    • MC1H-A125
    • MC112331
  • 160 A/100 kA
      • 125…160
      • fix 1280
    • MC1H-A160
    • MC116331

CIRCUIT BREAKER 4 POLE UP TO 160A WITH THERMAL MAGNETIC RELEASE TYPES MC1B-4-A, MC1N-4-A, MC1H-4-A

  • For system and line protection
  • 100% overload- and short-circuit protection
  • Adjustable overload releaser:I 0,8 – 1 x In (factory setting 0,8 x In)
  • Adjustable short-circuit releasei:I 6 – 10 x In (factory setting 6 x In); except MC.-A40: 8 - 10 x In
  • Box terminals as standard, screw terminals as accessories
  • Breaking capacity 25 / 50 / 100 kA at 415 V 50/60 Hz
  • Specifications to IEC/EN 60947-2
  • Rated uninterrupted current = Rated current

CIRCUIT BREAKER 4 POLE UP TO 160A WITH THERMAL MAGNETIC RELEASE TYPES MC1B-4-A, MC1N-4-A, MC1H-4-A

RATED CURRENT/ BREAKING CAPACITY

  • SETTING RANGE
    • OVERLOAD-RELEASE (A)
    • SHORT CIRCUIT- RELEASE (A)
  • TYPE
  • ORDER NO.

4 POLE (BASIC BREAKING CAPACITY) 25 kA

  • 20 A/25 kA
      • 15…20
      • fix 350
    • MC1B-4-A20
    • MC120141
  • 25 A/25 kA
      • 20…25
      • fix 350
    • MC1B-4-A25
    • MC125141
  • 32 A/25 kA
      • 25…32
      • fix 350
    • MC1B-4-A32
    • MC132141
  • 40 A/25 kA
      • 32…40
      • 320…400
    • MC1B-4-A40
    • MC140141
  • 50 A/25 kA
      • 40…50
      • 300…500
    • MC1B-4-A50
    • MC150141
  • 63 A/25 kA
      • 50…63
      • 380…630
    • MC1B-4-A63
    • MC163141
  • 80 A/25 kA
      • 63…80
      • 480…800
    • MC1B-4-A80
    • MC180141
  • 100 A/25 kA
      • 80…100
      • 600…1000
    • MC1B-4-A100
    • MC110141
  • 125 A/25 kA
      • 100…125
      • 750…1250
    • MC1B-4-A125
    • MC112141
  • 160 A/25 kA
      • 125…160
      • fix 1280
    • MC1B-4-A160
    • MC116141

4 POLE (NORMAL BREAKING CAPACITY) 50 kA

  • 20 A/50 kA
      • 15…20
      • fix 350
    • MC1B-4-A20
    • MC120241
  • 25 A/50 kA
      • 20…25
      • fix 350
    • MC1N-4-A25
    • MC125241
  • 32 A/50 kA
      • 25…32
      • fix 350
    • MC1N-4-A32
    • MC132241
  • 40 A/50 kA
      • 32…40
      • 320…400
    • MC1N-4-A40
    • MC140241
  • 50 A/50 kA
      • 40…50
      • 300…500
    • MC1N-4-A50
    • MC150241
  • 63 A/50 kA
      • 50…63
      • 380…630
    • MC1N-4-A63
    • MC163241
  • 80 A/50 kA
      • 63…80
      • 480…800
    • MC1N-4-A80
    • MC180241
  • 100 A/50 kA
      • 80…100
      • 600…1000
    • MC1N-4-A100
    • MC110241
  • 125 A/50 kA
      • 100…125
      • 750…1250
    • MC1N-4-A125
    • MC112241
  • 160 A/50 kA
      • 125…160
      • fix 1280
    • MC1N-4-A160
    • MC116241

4 POLE (HIGH BREAKING CAPACITY) 100 kA

  • 20 A/100 kA
      • 15…20
      • fix 350
    • MC1H-A20
    • MC120341
  • 25 A/100 kA
      • 20…25
      • fix 350
    • MC1H-A25
    • MC125341
  • 32 A/100 kA
      • 25…32
      • fix 350
    • MC1H-A32
    • MC132341
  • 40 A/100 kA
      • 32…40
      • 320…400
    • MC1H-A40
    • MC140341
  • 50 A/100 kA
      • 40…50
      • 300…500
    • MC1H-A50
    • MC150341
  • 63 A/100 kA
      • 50…63
      • 380…630
    • MC1H-A63
    • MC163341
  • 80 A/100 kA
      • 63…80
      • 480…800
    • MC1H-A80
    • MC180341
  • 100 A/100 kA
      • 80…100
      • 600…1000
    • MC1H-A100
    • MC110341
  • 125 A/100 kA
      • 100…125
      • 750…1250
    • MC1H-A125
    • MC112341
  • 160 A/100 kA
      • 125…160
      • fix 1280
    • MC1H-A160
    • MC116341

SWITCH DISCONNECTOR UP TO 160A TYPES MC1-PN, MC1-PN-4, MC1-N, MC1-N-4

  • Rated uninterrupted current up to 160A
  • Switch disconnector type MC1-PN two switch positions, 0/I, cannot be tripped remotely
  • Switch disconnector type MC1-N, with Trip setting “0”; “+”; “I”, can be tripped remotely with undervoltage/shunt release, trip-indicating auxiliary contacts possible
  • Box terminals as standard, screw terminals as accessories
  • Main switch characteristics including positive drive according to IEC/EN 60204 & VDE 0113
  • Isolating characteristics to IEC/EN 60947-3 and VDE 0660 Protection against accidental contact to VDE 0160 Part 100
  • Specifications to IEC/EN 60947-2
  • Rated uninterrupted current = Rated current
  • Rated short-circuit breaking capacity values:cmI 2,8kA
  • Rated short-time withstand current: Icw 2kA

SWITCH DISCONNECTOR UP TO 160A TYPES MC1-PN, MC1-PN-4, MC1-N, MC1-N-4

RATED CURRENT/ BREAKING CAPACITY

  • MAX. BACK-UP FUSE (gL) NO. FOR SWITCH DISCONNECTOR (AgL)
  • TYPE
  • ORDER

3 POLE CANNOT BE TRIPPED REMOTELY

  • 63 A
    • 125 A
    • MC1-PN-63
    • MC163034
  • 100 A
    • 125 A
    • MC1-PN-100
    • MC110034
  • 125 A
    • 125 A
    • MC1-PN-125
    • MC112034
  • 160 A
    • 160 A
    • MC1-PN-160
    • MC116034

4 POLE CANNOT BE TRIPPED REMOTELY

  • 63 A
    • 125 A
    • MC1-PN-4-63
    • MC163044
  • 100 A
    • 125 A
    • MC1-PN-4-100
    • MC110044
  • 125 A
    • 125 A
    • MC1-PN-4-125
    • MC112044
  • 160 A
    • 160 A
    • MC1-PN-4-160
    • MC116044

3 POLE CAN BE TRIPPED REMOTELY

  • 63 A
    • 125 A
    • MC1-N-63
    • MC163035
  • 100 A
    • 125 A
    • MC1-N-100
    • MC110035
  • 125 A
    • 125 A
    • MC1-N-125
    • MC112035
  • 160 A
    • 160 A
    • MC1-N-160
    • MC116035

4 POLE CAN BE TRIPPED REMOTELY

  • 63 A
    • 125 A
    • MC1-N-4-63
    • MC163045
  • 100 A
    • 125 A
    • MC1-N-4-100
    • MC110045
  • 125 A
    • 125 A
    • MC1-N-4-125
    • MC112045
  • 160 A
    • 160 A
    • MC1-N-4-160
    • MC116045

RESIDUAL-CURRENT (RCD)RELEASE TYPES MC1-N-XFI.R, MC1-N-4-XFI.R, MC1-N-XFI.U, MC1-N-4-XFI.U

  • Suitable for use in three- and single-phase systems
  • Pulse current sensitive accord. to core-balance principle
  • For 3- and 4-pole circuit breaker and switch disconnectors MC1, MC1-N, not for MC1-PN
  • Dependant on mains power Ue = 200 – 415 V 50/60 Hz
  • Meets IEC/EN 60947-2
  • Bottom mounting up to 100 A / installed from right 125A
  • Complete unit

TECHNICAL DATA

  • At IΔn = 0,03 A: Time delay tv permanently set to 10 ms.
  • Alarm message > 30 % Idn via yellow LED.
  • Trip-indicating auxiliary contacts can be fitted by user (max. 2 auxillary contacts): N/O: Order No: MM216376, N/C: Order No: MM216378 (see page 13) are reset via a reset toggle lever.
  • When using the trip-indicating auxiliary contacts in the FI module, the N/C contact works as an N/O contact and the N/O contact as an N/C.
  • Not for use in XCS insulated enclosures.
  • Type MC1-XFI...U cannot be combined with shunt or undervoltage releases and an early-make auxiliary contact.
  • Rated short-circuit breaking capacity values are determined by installed MC1 or when using a switch disconnector MC1-N by the back-up fuse to be used.

RESIDUAL-CURRENT (RCD)RELEASE TYPES MC1-N-XFI.R, MC1-N-4-XFI.R, MC1-N-XFI.U, MC1-N-4-XFI.U

FOR TYPE

  • RATED FAULT CURRENTΔn(I)
  • TIME-DELAY (ms)
  • TYPE
  • ORDER NO.

3 POLE INSTALLED FROM RIGHT UP TO 125A

  • MC1-N
    • 0.03
    • 10
    • MC1-N-XFI30R
    • MC194603
  • MC1-N
    • 0.3
    • 10
    • MC1-N-XFI300R
    • MC194604
  • MC1-N
    • 0.03-0.1-0.3-0.5-1-3
    • 10, 60, 150, 300, 450
    • MC1-N-XFIR
    • MC19460

4 POLE INSTALLED FROM RIGHT UP TO 125A

  • MC1-4 / MC1-N-4
    • 0.03
    • 10
    • MC1-N-4-XFI30R
    • MC194606
  • MC1-4 / MC1-N-4
    • 0.3
    • 10
    • MC1-N-4-XFI300R
    • MC194607
  • MC1-4 / MC1-N-4
    • 0.03-0.1-0.3-0.5-1-3
    • 10, 60, 150, 300, 450
    • MC1-N-4-XFIR
    • MC194608

3 POLE BOTTOM MOUNTING UP TO 100A

  • MC1-N
    • 0.03
    • 10
    • MC1-N-XFI30U
    • MC194609
  • MC1-N
    • 0.3
    • 10
    • MC1-N-XFI300U
    • MC194610
  • MC1-N
    • 0.03-0.1-0.3-0.5-1-3
    • 10, 60, 150, 300, 450
    • MC1-N-XFIU
    • MC194611

4 POLE BOTTOM MOUNTING UP TO 100A

  • MC1-4 / MC1-N-4
    • 0.03
    • 10
    • MC1-N-4-XFI30U
    • MC194612
  • MC1-4 / MC1-N-4
    • 0.3
    • 10
    • MC1-N-4-XFI300U
    • MC194613
  • MC1-4 / MC1-N-4
    • 0.03-0.1-0.3-0.5-1-3
    • 10, 60, 150, 300, 450
    • MC1-N-4-XFIU
    • MC194614

STANDARD AUXILIARY CONTACT / TRIP-INDICATING AUXILIARY CONTACT TYPE M22

  • Switches with the main contacts, used for indicating and interlocking tasks
  • General trip indication “+” with trip due to voltage release,overload release or short-circuitrelease

TECHNICAL DATA

  • Breaking capacity:
    • AC15: 4 A / 230 VAC
    • DC13: 3 A / 24 VDC

TIPS & TRICKS

  • The trip-indicating auxiliary contacts is the same contact as the standard auxiliary contact. It derives its function from its place of installation where it is installed (alarm contact on left).
  • Maximum component installation with auxillary contacts:
    • 1 x Standard auxiliary contact (HIN) M22-K. or M22-CK..
    • + 1 x Trip-indicating contact (HIA) M22-K. or M22-CK..

STANDARD AUXILIARY CONTACT / TRIP-INDICATING AUXILIARY CONTACT TYPE M22

DESCRIPTION

  • TYPE
  • ORDER NO.

1 NO contact with plug screw terminals

  • M22-K10
  • MM216376

1 NC contact with plug screw terminals

  • M22-K01
  • MM216378

2 NO contacts with cage clamp terminals

  • M22-CK20
  • MM107898

2 NC contacts with cage clamp terminals

  • M22-CK02
  • MM107899

EARLY-MAKE AUXILIARY CONTACT TYPE MC1-XHIVL

For interlock- and load-shedding circuits as well as for early make of undervoltage release in main switch/Emergency stop applications.

TECHNICAL DATA

  • Early-make during switch on and off (manual switch): approx. 20 ms
  • Not in connection with undervoltage release MC1-XU... or shunt release MC1-XA...
  • Breaking capacity:
    • AC15: 4 A / 230 VAC
    • DC13: 3 A / 24 VDC

EARLY-MAKE AUXILIARY CONTACT TYPE MC1-XHIVL

DESCRIPTION

  • TYPE
  • ORDER NO.

Early-make auxiliary contact, 2 N/O incl. 3 m cable

  • MC1-XHIVL
  • MC199432

UNDERVOLTAGE RELEASE TYPES MC1-XUL

  • Non-delayed breaking of circuit breaker MC/ switch disconnector MC-N when the control voltage drops below 35 % -70% Us.
  • For use in Emergency stop devices in connection with EMERGENCY STOP button
  • Installed in breaker
  • Without auxiliary contact

TIPS & TRICKS

When the undervoltage release is de-energized, accidental contact with the main contacts of the switch is safely prevented during attempts to switch on. Undervoltage release cannot be installed simultaneously with an shunt release or early-make auxiliary contact MC1-XHIV.

UNDERVOLTAGE RELEASE TYPES MC1-XUL

VOLTAGE

  • VERSION
  • TYPE
  • ORDER NO.

24 VAC

  • incl. 3m cable
  • MC1-XUL24AC
  • MC199462

24 VDC

  • incl. 3m cable
  • MC1-XUL24DC
  • MC199481

208-240 V AC

  • incl. 3m cable
  • MC1-XUL208-240AC
  • MC199471

380-440 V AC

  • incl. 3m cable
  • MC1-XUL380-440AC
  • MC199473

Other voltage variants available upon request.

UNDERVOLTAGE RELEASE WITH TWO EARLY-MAKE AUXILIARY CONTACTS TYPES MC1-XUHIVL

  • With 2 early-make auxillary contacts
  • For early-make of the undervoltage release in main switch applications and for interlock- and load-shedding circuits
  • Installed in breaker
  • Other voltages and connection versions available on request

TIPS & TRICKS

When the undervoltage release is de-energized, accidental contact with the main contacts of the switch is safely prevented during attempts to switch on. Early-make of auxiliary contacts during switch on and off (20ms). Undervoltage releases cannot be installed simultaneously with shunt releases or early-make auxiliary contact, type MC1-XHIV.

UNDERVOLTAGE RELEASE WITH TWO EARLY-MAKE AUXILIARY CONTACTS TYPES MC1-XUHIVL

VOLTAGE

  • VERSION
  • TYPE
  • ORDER NO.

208 - 240 VAC

  • incl. 3m cable
  • MC1-XUHIVL230V
  • MC199565

380 - 440 VAC

  • incl. 3m cable
  • MC1-XUHIVL400VAC
  • MC199567

Other voltage variants available upon request.

UNDERVOLTAGE RELEASE, OFF-DELAY TYPES MC-UVU, MC-XUVL

  • Voltage drops less than 0,07–16 s do not cause MC circuit breakers or N switch disconnectors to trip.
  • Suitable for voltages:
    • 220 – 240 VAC 50/60 Hz
    • 380 – 440 VAC 50/60 Hz
    • 480 – 550 VAC 50/60 Hz
    • 24 VAC/DC

TECHNICAL DATA

  • Time-delay adjustable between 70 ms – 4 s
  • With additional external capacitor:
    • 30.000 μF≥35 V to 8 s
    • 90.000 μF≥35 V to 16 s
  • Special release MC1-XUVL is required.
  • Cannot be installed at same time with early-make auxiliary contact MC1-XHIV... or shunt release MC1-XA....
  • Time-delay device for separate mounting (Fixing: DIN rail or screws).
  • For other operating voltages, please use a control transformer.

UNDERVOLTAGE RELEASE, OFF-DELAY TYPES MC-UVU, MC-XUVL

NAME

  • TYPE
  • ORDER NO.

Time-delay unit

  • MC-UVU
  • MC196154

Special undervoltage release for time-delay unit MC1

  • MC1-XUVL
  • MC191607

SHUNT RELEASE TYPE MC1-XAL

  • Without auxiliary contact
  • Switches are tripped by a voltage pulse or by the application of uninterrupted voltage

TECHNICAL DATA

  • When the shunt release is energized, accidental contact with the main contacts of the switch is safely prevented during attempts to switch on.
  • Shunt release cannot be installed simultaneously with undervoltage releases or early-make auxiliary contact MC1-XHIV.

SHUNT RELEASE TYPE MC1-XAL

VOLTAGE

  • VERSION
  • TYPE
  • ORDER NO.

24 VAC/DC

  • incl. 3m cable
  • MC1-XAL24AC/DC
  • MC199736

208 - 250 VAC/DC

  • incl. 3m cable
  • MC1-XAL230AC/DC
  • MC199744

MECHANICAL INTERLOCK FOR (DOOR COUPLING-) ROTARY HANDLES FOR MC1

  • Rotary handle on switch or door coupling rotary handle additionally required.
  • Cannot be combined with remote operator or door frame.
  • At least 2 interlocking modules are required to construct a mechanical interlocking circuit. Bowden cable to be ordered separately.

MECHANICAL INTERLOCK FOR (DOOR COUPLING-) ROTARY HANDLES FOR MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Mechanical interlock

  • MC1-XMV
  • MC191581

Bowden cable 225 mm

  • MC-XBZ225
  • MC191585

Bowden cable 600 mm

  • MC-XBZ600
  • MC191586

Bowden cable 1000 mm

  • MC-XBZ1000
  • MC191587

ROTARY HANDLE DIRECTLY ON SWITCH FOR MC1

  • Complete with rotary drive
  • Can also be combined with door frame

TECHNICAL DATA

Available in the following versions:

  • Type MC.-XDV
    • Lockable in the “0” position (up to three padlocks), black/grey
  • Type MC.-XDVR
    • Lockable in the “0” position (up to three padlocks), Emergency stop red/yellow
  • Type MC.-XDTV
    • Lockable in the “0” position on handle, modification also available in “1” position, black/grey
  • Type MC.-XDTVR
    • Lockable in “0” position, Emergency Stop red/yellow

Version comes with door interlock:

  • Door frame supplied with door interlock
  • Rotary handle can be rotated 90° for horizontally-mounted switches
  • In the ON position, can be defeated from the outside using a 1 mm pin
  • Cannot be defeated in the locked OFF and ON positions
  • Door can be opened in OFF
  • Can only be switched on when door closed

ROTARY HANDLE DIRECTLY ON SWITCH FOR MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Lockable rotary handle for MC1, black/grey

  • MC1-XDV
  • MC190125

Lockable rotary handle for MC1, Emergency stop red/yellow

  • MC1-XDVR
  • MC190135

Rotary handle for MC1 with door interlock, lockable, black/grey

  • MC1-XDTV
  • MC190131

Rotary handle for MC1 with door interlock, lockable, Emergency stop red/yellow

  • MC1-XDTVR
  • MC190142

DOOR COUPLING ROTARY HANDLE FOR MC1

  • Complete unit including rotary drive and coupling parts
  • Degree of Protection IP66
  • Rotary handle can be rotated 90° for horizontally-mounted switches
  • Cannot be defeated in the locked OFF and ON positions
  • Can be modified when in the unlocked ON position, can be defeated from the outside with a screwdriver
  • Door can be opened in OFF
  • External warning plate/designation plate can be clipped on

NOTES

  • Order extension shaft separately!

TECHNICAL DATA

  • Available in the following versions:
    • Type MC.-XTVD
      • Lockable in the “0” position on handle with up to three padlocks, with door interlock, black/grey
    • Type MC.-XTVDV
      • Lockable in the “0” position on handle and switch, with up to three padlocks, with door interlock, black/grey
    • Type MC.-XTVDVR
      • Lockable in the “0” position on handle and switch with up to three padlocks, with door interlock, Emergency stop red/yellow

DOOR COUPLING ROTARY HANDLE FOR MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Door coupling rotary handle for MC1 with door interlock, lockable, black/grey

  • MC1-XTVD
  • MC190166

Door coupling rotary handle for MC1 with door interlock, lockable, “0”, “1”, black/grey

  • MC1-XTVDV
  • MC190172

Door coupling rotary handle for MC1 with door interlock, lockable, Emergency stop red/yellow

  • MC1-XTVDVR
  • MC190178

EXTENSION SHAFT FOR MC1

  • For maximum cabinet depths of 400 or 600 mm
  • Can be cut to required length

EXTENSION SHAFT FOR MC1

DESCRIPTION

  • CABINET DEPTH
  • TYPE
  • ORDER NO.

Extension shaft for MC1 max. 400 mm

  • max. 400 mm
  • MC1/2-XV4
  • MC191232

Extension shaft for MC1 max. 600 mm

  • max. 600 mm
  • MC1/2-XV6
  • MC190191

BOX TERMINALS FOR MC1

  • Standard connection for all MC1, MC1-PN and MC1-N switches
  • Conversion kit for switches with screw connection
  • Contains parts for one switch side
  • Installed inside the switch housing
  • Use cover plate MC.-XSKA
  • Terminal capacities
    • CU conductors 1 x 10–70 mm2
    • CU cables 2 x 6–25 mm2

BOX TERMINALS FOR MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Box terminal up to 160 A (contains 3 pcs.) for MC1

  • MC1-160-XKC
  • MC190015

Box terminal up to 160 A (includes 4 pcs.) for MC1-4

  • MC1-160-4-XKC
  • MC197075

SCREW CONNECTION FOR MC1

  • Contains parts for one switch side located at top or bottom 3- or 4 pole switches
  • Installed outside switch housing
  • Cover plate MC.-XSKA included
  • Terminal capacities
    • CU conductors 1 x 10–70 mm2, 2 x 6–25 mm2
    • AL cable lugs 1 x 10–35 mm2, 2 x 10–35 mm2

SCREW CONNECTION FOR MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Screw connection 3 pcs. for MC1

  • MC1-XKS
  • MC190019

Screw connection 4 pcs. for MC1-4

  • MC4-4-XKC
  • MC196725

TUNNEL TERMINAL FOR MC1

  • Contains parts for one switch side, top or bottom
  • With terminal for control circuit for 1 x 0,75–2,5 mm2, 2 x 0,75–1,5 mm2 Cu conductor
  • Installed outside switch housing
  • Maximum specified cross-section can only be connected stranded and without end sleeve.
  • Cover plate MC1(-4)-XKSA must be installed (supplied).
  • Terminal capacities:
    • Cu cable, AI cable95 mm2

TECHNICAL DATA

  • for Cu- And AI cables
  • Includes cover plate
  • Stranded round conductor / stranded sector-shaped conductor
  • Use with flexible and ultra-flexible conductor end sleeves

TUNNEL TERMINAL FOR MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Tunnel terminal 95 mm2, 3 pole for MC1

  • MC1-XKA
  • MC196730

Tunnel terminal 95 mm2, 4 pole for MC1-4

  • MC1-4-XKA
  • MC196731

REAR CONNECTION FOR MC1

  • Contains parts for one switch side located at top or bottom 3- or 4 pole switches
  • Terminal capacities:
    • Cu cable lug 1 x 10–70 mm2, 2 x 6–25 mm2
    • Al cable lug 1 x 10–35 mm2, 2 x 10–35 mm2

REAR CONNECTION FOR MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Rear connection, 3 pole for MC1

  • MC1-XKR
  • MC196734

Rear connection, 4 pole for MC1-4

  • MC1-4-XKR
  • MC196737

CONTROL CIRCUIT TERMINAL FOR MC1

  • Contains parts for two terminals located at top or bottom for 3/ 4 pole switches
  • Included with tunnel terminal
  • Terminal capacities:
    • Screw connection 1 x 0,75 – 2,5 mm2, 2 x 0,75 – 1,5 mm2

CONTROL CIRCUIT TERMINAL FOR MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Control circuit terminal for box terminal MC1

  • MC-XSTK
  • MC196739

Control circuit terminal for screw connection MC1

  • MC1-XSTS
  • MC190150

TERMINAL COVER FOR MC1

  • Protection against accidental contact when using cable lugs, rails or Tunnel terminals
  • Contains parts for one switch side located at top or bottom 3- or 4 pole switches
  • Degree of protection IP4X front, side and rear, IP1X on the connection side when using insulated conductor material
  • Cover plate included with tunnel terminals

TERMINAL COVER FOR MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Terminal cover, 3 pole for MC1

  • MC1-XKSA
  • MC190021

Terminal cover, 4 pole for MC1-4

  • MC1-4-XKSA
  • MC196741

CONNECTION COVER, KNOCKOUT FOR BOX TERMINAL MC1

Connection cover, knockout

CONNECTION COVER, KNOCKOUT FOR BOX TERMINAL MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Terminal cover, 3 pole for MC1

  • MC1-XKSFA
  • MC190780

Terminal cover, 4-pol. for MC1-4

  • MC1-4-XKSFA
  • MC196781

IP2X FINGER PROTECTION FOR DIRECT-MOUNTED MC1 SWITCHES

  • Increases protection against accidental contact to IP2X
  • Protection when reaching into the cable connection area when cables are connected
  • MC1-XIPA and MC1-4-XIPA only in combination with cover plate
  • Contains parts for one switch side, top or bottom

IP2X FINGER PROTECTION FOR DIRECT-MOUNTED MC1 SWITCHES

DESCRIPTION

  • TYPE
  • ORDER NO.

FOR BOX TERMINAL

  • Finger protection, 3 pole for MC1
    • MC1-XIPK
    • MC196744
  • Finger protection, 4 pole for MC1
    • MC1-4-XIPK
    • MC196745

FOR TERMINAL COVER

  • Finger protection, 3 pole for MC1
    • MC1-XPA
    • MC196748
  • Finger protection, 4 pole for MC1
    • MC1-4-XIPA
    • MC196749

INSULATED ENCLOSURE XCI

  • Only for switches with box terminals for direct cable connection
  • With door coupling rotary handle
  • Complete unit includes all necessary functional parts
  • Degree of protection IP65
  • MC1-XCI23 housing with flanges
  • MC1-XCI43 are fitted with gland plates

TECHNICAL DATA

  • Enclosure suitablefor installation of circuit-breakers and switch-disconnectors for separate mounting with top and bottom cable entry.
  • Including fixing straps for wall mounting. Short circuit protection at 415 V 50/60 Hz to 10 kA.
  • Not in combination with remote operator, plug-in- or withdrawable unit.
  • Additional insulated terminals for 4 or 5 pole must be ordered separately.

Available in the following versions:

  • Standard, black/grey
    • Lockable in the “0” position at handle with up to 3 padlocks. Additionally with cover interlock.
  • For Emergency stop, red/yellow
    • Lockable on handle and switch lockable with up to 3 padlocks in the “0” position on handle. Additionally with cover interlock and lockable at switch in the “0” position.

INSULATED ENCLOSURE XCI

DESCRIPTION

  • MAX. RATED UNINTERRUPTED CURRENT
  • TYPE
  • ORDER NO.

STANDARD, BLACK/GREY

  • Insulated enclosure for MC1, 3 pole
    • ≤ 63 A
    • MC1-XCI23-TVD
    • MC191522
  • Insulated enclosure for MC1-4, 3-pole or 4 pole
    • ≤ 125 A
    • MC1-XCI43
    • MC191523
  • Insulated enclosure for MC1-4, 3-pole or 4 pole
    • ≤ 160 A
    • MC1-XCI43/2-TVD
    • MC194645

FOR EMERGENCY STOP, RED/YELLOW

  • Insulated enclosure for MC1, 3 pole
    • ≤ 63 A
    • MC1-XCI23-R
    • MC191527
  • Insulated enclosure for MC1-4, 3- or 4-pole
    • ≤ 125 A
    • MC1-XCI43-R
    • MC191528
  • Insulated enclosure for MC1-4, 3- or 4 pole
    • ≤ 160 A
    • MC1-XCI43/2-R
    • MC194646

ADDITIONAL INSULATED TERMINALS FOR MC1

  • For looping through the neutral and earth conductor
  • 1 pole

ADDITIONAL INSULATED TERMINALS FOR MC1

DESCRIPTION

  • TERMINAL CAPACITY
  • TYPE
  • ORDER NO.

Additional insulated terminal 32 A

  • Fine-wired 1 x (1,5-6 mm2)
  • K10/1
  • MC193827

Additional insulated terminals 63 A

  • Fine-wired 1 x (6-16 mm 2), stranded 1 x (16-25 mm2)
  • K25/1
  • MC196200

Additional insulated terminals 100 A

  • Fine-wired 1 x (10-35 mm 2), stranded 1 x (16-50 mm2)
  • K50/1
  • MC198573

Additional insulated terminal 160 A

  • Stranded 1 x (16-95 mm 2)
  • K95/1N/BR
  • MC192336

DEVICE ADAPTERS FOR CIRCUIT-BREAKERS AND SWITCH-DISCONNECTORS FOR 60 mm BUSBAR SYSTEM, MC1

  • For mounting on flat copper rails 12 x 5 mm bis 30 x 10 mm
  • Double T and triple T profile
  • Snaps onto the voltage-free busbar
  • Rated operational voltage Ue: 690 V

TECHNICAL DATA

  • MC 1 up to 160 A:
    • For switches with standard box terminal connection
    • Connected to system via terminal strips above
    • Can be used in connection with IP2X finger protection to increase accidental-contact protection against accidental contact on outgoing side

DEVICE ADAPTERS FOR CIRCUIT-BREAKERS AND SWITCH-DISCONNECTORS FOR 60 mm BUSBAR SYSTEM, MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

60 mm busbar adapter 160 A for MC1, 3 pole

  • 32570
  • MC195700

4 pole adapter with cover plate

  • MC3-4XKR13
  • upon request

DOOR SEALING FRAME FOR MC1

  • For toggle levers, rotary handles with rotary- and remote operators
  • Degree of protection IP40
  • For rectangular cut-out on doors and enclosures with material thicknesses of 1,5 – 5 mm
  • External warning plate/designation plate can be clipped on

DOOR SEALING FRAME FOR MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Door sealing frame for MC1

  • MC1-XBR
  • MC190195

TOGGLE LEVER LOCKING DEVICE FOR MC1

  • Off position lockable with up to 3 padlocks (hasp thickness 4 – 8 mm)
  • Cannot be combined with Insulating surround

TOGGLE LEVER LOCKING DEVICE FOR MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Toggle lever locking device for MC1

  • MC1-XKAV
  • MC190199

SPACER FOR MC1

  • Enables fast and low-priced adjustment of various frame sizes with/without rotary handle or remote operator at identical front depth
  • Grid depth 17,5 mm, thread M4
  • Each set contains 4 x spacers
  • Maximum component installation 4 pcs. per fastening screw
  • 2 fastening screws included for each circuit breaker MC1

SPACER FOR MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Spacer for MC1

  • MC1/2-XAB
  • MC190203

CLIP PLATE FOR MC1

Enables snap fit of circuit breakers / switch disconnectors to DIN rail (35 mm top-hat rail)

CLIP PLATE FOR MC1

DESCRIPTION

  • TYPE
  • ORDER NO.

Clip plate for MC1

  • MC1-XC35
  • MC190213

Product enquiry and further information

We would be delighted to offer free application advice, technical information on products, free quotations and delivery information.

Name

Telephone

Product enquiry & further information