Modular Devices

Modular Devices

MAIN LOAD-BREAK SWITCH (ISOLATOR)

  • Design meets IEC/EN 60947-3
  • Load-break switch for continuous running
  • Can be used as a main switch w/ isolating function
  • Can come lead-sealed with locking option and accessories
  • Can be used to switch motors & highly-inductive loads
  • Rated voltage: 240/415 V, 50/60 Hz
  • Max. permitted back-up fuse: 125 A
  • High rated-isolation voltage: Ui = 690 V
  • Thermic rated current: Ith = 40/63/80/100/125 A
  • Rated current
    • AC 23...50 A
    • AC 22..0.100 A
  • Conductor cross section: 50 mm2
  • Fits RCCB and MCB rails

RATED CURRENT/NR. POLES

  • DIM. (WxHxD) mm
  • ORDER NO.

40 A/1-pole

  • 7,5x80x73,5
  • BZ900241

40 A/2-pole

  • 35x80x73,5
  • BZ900242

40 A/3-pole

  • 52,5x80x73,5
  • BZ900243

40 A/4-pole

  • 70x80x73,5
  • BZ900244

63 A/1-pole

  • 17,5x80x73,5
  • BZ900261

63 A/2-pole

  • 35x80x73,5
  • BZ900262

63 A/3-pole

  • 52,5x80x73,5
  • BZ900263

63 A/4-pole

  • 70x80x73,5
  • BZ900264

80 A/1-pole

  • 17,5x80x73,5
  • BZ900281

80 A/2-pole

  • 35x80x73,5
  • BZ900282

80 A/3-pole

  • 52,5x80x73,5
  • BZ900283

80 A/4-pole

  • 70x80x73,5
  • BZ900284

100 A/1-pole

  • 17,5x80x73,5
  • BZ900201

100 A/2-pole

  • 35x80x73,5
  • BZ900202

100 A/3-pole

  • 52,5x80x73,5
  • BZ900203

100 A/4-pole

  • 70x80x73,5
  • BZ900204

125 A/1-pole

  • 17,5x80x73,5
  • BZ900221

125 A/2-pole

  • 35x80x73,5
  • BZ900222

125 A/3-pole

  • 52,5x80x73,5
  • BZ900223

125 A/4-pole

  • 70x80x73,5
  • BZ900224

Modular Devices

SERIES BM ON-OFF SWITCH, 40 A, 63 A

  • Design meets IEC/EN 60947-3
  • Rated voltage/frequency: 230/400 V AC, 50/60 Hz
  • Conductor cross section: 1-25 mm2
  • Finger and hand touch safe VBG 4 / EN/IEC 6
  • Mounting system: special snap-on mounting for DIN rails EN 50 022
  • Contact position indicator with coloured (red/green) window

RATED CURRENT/NR. POLES

  • DIM. (WxHxD) mm
  • ORDER NO.

40 A/1-pole

  • 17,5x80x75,5
  • BM900011

40 A/2-pole

  • 35x80x75,5
  • BM900012

40 A/3-pole

  • 52,5x80x75,5
  • BM900013

40 A/3+N-pole

  • 70x80x75,5
  • BM900018

63 A/1-pole

  • 17,5x80x75,5
  • BM900014

63 A/2-pole

  • 35x80x75,5
  • BM900015

63 A/3-pole

  • 52,5x80x75,5
  • BM900016

63 A/3+N-pole

  • 70x80x75,5
  • BM900019

Modular Devices

SWITCH BZ SERIES, WITHOUT SIGNAL LAMP, 16 A

  • Meets IEC EN 60947-3
  • Rated voltage/frequency: 230/400V AC, 50/60 Hz
  • Conductor cross section: 1-10 mm2
  • Finger and hand touch protection BVG A3 / EN/IEC 6
  • Mounting system: Special snap-on fastening for DIN rail EN 50 022

RATED CURRENT/CONTACTS

  • DIM. (WxHxD) mm
  • ORDER NO.

16 A/1 NO

  • 17,5x90x65
  • BZ107010

16 A/2 NO

  • 17,5x90x65
  • BZ107020

16A/1 NO / 1 NC

  • 17,5x90x65
  • BZ107030

16 A/1 C/O

  • 17,5x90x65
  • BZ107050

Modular Devices

SWITCH BZ SERIES, WITHOUT SIGNAL LAMP, 32 A

  • Meets E C EN 60947-3
  • Rated voltage/frequency: 230/400V AC, 50/60 Hz
  • Conductor cross section: 1-10 mm2
  • Finger and hand touch protection BVG A3 / EN/IEC 6
  • Mounting system: Special snap-on fastening for DIN rail EN 50 022

RATED CURRENT/CONTACTS

  • DIM. (WxHxD) mm
  • ORDER NO.

32 A/1 NO

  • 17,8x80x74,5
  • BZ136010

32 A/2 NO

  • 17,8x80x74,5
  • BZ136020

32 A/3 NO

  • 17,8x80x74,5
  • BZ136030

Modular Devices

SWITCH BZ SERIES, WITH LED, 16 A

  • Lamp: LED with a supply voltage of 24 V or 230 V AC/DC

RATED CURRENT/CONTACTS/SIGNAL VOLTAGE

  • DIM. (WxHxD) mm
  • ORDER NO.

16 A/1 NO + 1 NC/24 AC/DC

  • 17,5x90x65
  • BZ127131

16 A/2 NO / 24 AC/DC

  • 17,5x90x65
  • BZ127121

16A/1 NO + 1 NC /230 AC/DC

  • 17,5x90x65
  • BZ117131

16 A/2 NO /230 AC/DC

  • 17,5x90x65
  • BZ117121

Modular Devices

SWITCH BZ SERIES, WITH SIGNAL LAMP, 32 A

  • Lamp: Glow lamp 250 V, E 10
  • Clear hood pre-mounted
  • Lamp (max. 2W) and hood are replaceable

RATED CURRENT/CONTACTS

  • DIM. (WxHxD) mm
  • ORDER NO.

32 A/3 NO

  • 17,8x80x74,5
  • BZ136130

Modular Devices

CHANGEOVER SWITCH BZ SERIES, WITH ZERO POSITION

RATED CURRENT/CONTACTS

  • DIM. (WxHxD) mm
  • ORDER NO.

16 A/1 C/O with 0

  • 17,8x80x74,5
  • BZ106380

16 A/2 C/O with 0

  • 17,8x80x74,5
  • BZ106390

Modular Devices

PUSH-BUTTON SWITCH BZ SERIES

RATED CURRENT/CONTACTS

  • DIM. (WxHxD) mm
  • ORDER NO.

16 A/1 NO

  • 17,5x90x65
  • BZ107410

16A/1 NO + 1 NC

  • 17,5x90x65
  • BZ107430

Modular Devices

PUSH-BUTTON SWITCH BZ SERIES, WITH LED

RATED CURRENT/CONTACTS/SIGNAL VOLTAGE

  • DIM. (WxHxD) mm
  • ORDER NO.

16A/1 NO + 1 NC / 24 VAC/DC

  • 17,5x90x65
  • BZ127531

16A/1 NO + 1 NC /230 V AC/DC

  • 17,5x90x65
  • BZ117531

Modular Devices

INDICATOR LIGHT BZ SERIES

DESCRIPTION

  • ORDER NO.

Single light 12-24 V AC/DC

  • BZ127904

Single light 110-240 V AC/DC

  • BZ117904

Double light 12-24 V AC/DC red/green, 2-colour LED’s red/green can be unclipped

  • BZ127908

Double light 110-240 V AC/DC red/green, 2-colour LED’s red/green can be unclipped

  • BZ117908

Double light 12-24 V AC/DC red/green, 2-colour LED’s red/green can be unclipped

  • BZ127908

Indicator ligth with bulb

  • BZ106800

Modular Devices

ACCESSORIES FOR BZ SERIES

DESCRIPTION

  • ORDER NO.

Incandescent lamp 24 V

  • BZ336902

Incandescent lamp 230 V

  • BZ336903

Glow lamp, green 230 V (must be used with a green hood)

  • BZ900002

Modular Devices

MODULAR IMPULSE RELAY

  • 1 to 4-pole
  • Main contacts
    • N/O 1, 2, 3 and 4 (1 MW)
    • C/O 1 and 2 (1-2 MW)
  • Control circuit:
    • Control voltage Us:
      • 8, 12, 24, 48, 230 V AC 50Hz
      • 8, 12, 24, 110 V DC
    • Range: 0,9 - 1,1 x Us
    • Pull-in power of coil
      • 12 VA / 7 W typ.
    • Minimum command time
      • > 200 ms
    • Duty cycle: 1 hr. unlimited with spacer
  • Load circuit:
  • Rated operating voltage, 1-pole:
  • 250 V AC; 2 / 3 / 4-pole: 240 / 415 V AC
  • Minimum operating voltage Umin: 24 V AC/DC
  • Rated voltage DC: 24 V Ie 16 A
  • 48 V Ie 12.5 A
  • 230 V Ie 1 A
  • Rated continuous current lu: 16 A
  • Short circuit current: 10 kA (with 20 A gL/gG fuse)
  • Service life
    • electrical: ≥40 x 102 operations
    • mechanical:≥1 x 106 operations
  • Degree of protection: IP 20
  • No restrictions on service position
  • Terminals above and below with firmly-secured lift terminals
  • Terminal cross section
    • 0.5-10 mm2 single- and multi-wire
    • 0.5-6 mm2 fine wire with end sleeve
  • Temperature range: -25° C to +45° C
  • Contact material is Cadmium free
  • Can be clipped onto top-hat rail EN50022

CERTIFICATIONS

IEC/EN 60669-2-2

MODULAR IMPULSE RELAY

DESCRIPTION / RATED VOLTAGE

  • ORDER NO.

Remote switch, 1 NO, 8 V AC

  • LQ611008

Remote switch, 1 NO, 12 V AC

  • LQ611012

Remote switch, 1 NO, 24 V AC/12 V DC

  • LQ611024

Remote switch, 1 NO, 48 V AC/24 V DC

  • LQ611048

Remote switch, 1 NO, 230 V AC

  • LQ611230

Remote switch, 2 NO, 24 V AC/12 V DC

  • LQ612024

Remote switch, 2 NO, 48 V AC/24 V DC

  • LQ612048

Remote switch, 2 NO, 230 V AC

  • LQ612230

Remote switch, 1 C/O, 230 V AC

  • LQ617230

Remote switch, 2 C/O, 230 V AC

  • LQ618230

Remote switch w/ LED, 2 NO, 230 V AC

  • LQ622230

Modular Devices

IMPULSE RELAY 10 A, 250 V AC, 1 N/O

  • Operating voltage: 8, 24, 230 V AC
  • Rated current: 10 A

RANGE OF APPLICATION

  • For installation in wall boxes or snap-on mounting on DIN rails
  • Contact load for flourescent lamps: 36 lamps á 36 Watts, compensated

CONTROL VOLTAGE/CONTACTS

  • DIM. (WxHxD) mm
  • ORDER NO.

24 V AC, 14 V DC/1 NO

  • 26,5x61x28,2
  • LQ203024

24 V DC/1 NO

  • 26,5x61x28,2
  • LQ213024

230 V AC, 127 V DC/1 NO

  • 26,5x61x28,2
  • LQ203230

Snap-on mounting on top-hat rail

  • 9x50x5
  • LQ300008

Modular Devices

IMPULSE RELAY 10 A, 250 V AC, 2 C/O

  • Operating voltage: 8, 24, 230 V AC
  • Rated current: 10 A

RANGE OF APPLICATION

  • For installation in wall boxes or snap-on mounting on DIN rails
  • Contact load for flourescent lamps:
    • 36 lamps á 36 Watts, uncompensated
    • 40 lamps á 36 Watts, compensated

CONTROL VOLTAGE/CONTACTS

  • DIM. (WxHxD) mm
  • ORDER NO.

24 V AC, 12 V DC/2 C/O

  • 47x58x34
  • LQ207024

230 V AC, 110 V DC/2 C/O

  • 47x58x34
  • LQ207220

Snap-on fastening for series 43, 2 pieces required

  • 5x40x30
  • LQ300007

Modular Devices

SCHRACK COMMUNICATION CENTER II

  • Easily configured from your Internet browser - does not require any additional software
  • Remotely configurable via a GSM modem using PPP
  • Network connection and serial interface
  • Low power consumption through low power support
  • Monitoring via 2 analogue Pt100 and 6 digital inputs
  • Ideal for remote monitoring of UR5 monitoring relay
  • Controls 7 digital outputs
  • Alarms sent via email and SMS
  • Compact enclosure for top-hat mounting
  • Supply voltage 12-24 V-DC
  • Transposed network cable (for direct connection with PC included)
  • Integrated Antenna

HEATING SYSTEMS, SHUTTERS, UPS’S, ALARM SYSTEMS

The SCHRACK Communication Center is your ideal partner for the remote monitoring and control of any system. Use the digital inputs to retrieve data directly from your system’s auxillary- and signal contacts (RCCB- or combined RCCB/MCB devices). You need to monitor voltages, currents, phase failures, etc? Then order the SCHRACK Communication Center with monitoring relays from or ZR5 series.

Up to 8 persons can be notifed by email or SMS should any of the measured values stray from the standard range. All messages of course come in easy-to-follow plain text (pre-defined by customers) with an overview of all current values! Customers can also call up the status of the system at any time via SMS. Should technicians need to interven directly in the system, they can switch on and off the 6 digital outputs of the SCHRACK Communication Center via SMS. And what happens if a parameter or telephone number changes? Easy! All you need is nothing more than a laptop or PDA with a standard web browser and of course your mobile. You do not even need to visit the SCHRACK Communication Center. Without any fuss, you can simply dial into the device from your workstation and enter the new parameters on the SCHRACK Communication Center webpage.

POSSIBLE ACCESSORIES

  • Auxillary contacts for motor protection-, RCCB-, and combined RCCB/MCB devices
  • BR900003 remote trip for BR series MCBs
  • LP746101 modular PSU, 24V DC
  • UR5..... Current-, voltage-, phase-, thermistor-, or level monitoring relays

SCHRACK COMMUNICATION CENTER II

DESCRIPTION

  • DIM. (WxHxD) mm
  • ORDER NO.

Communication Center II

  • 105x86x64
  • BZ990001

Additional antenna with cable

  • BZ990000

Modular Devices

TIMERS FOR STAIRCASE LIGHTING, COMFORT EDITION

  • 3/4 terminals, automatic detection
  • Switching capacity 16 A/250 V AC
  • Adjustable between 30 s and 20 min
  • Lamp load:
    • Incandescent lamps 2300 W
    • Flourescent lamps: 2300 W DUO, 1000 W parallel
  • Glow lamp proof, 50 push buttons x 1 mA
  • Instant reset possible

DESCRIPTION

  • DIM. (WxHxD) mm
  • ORDER NO.

Timer for staircase lighting,

  • 17,5 mm 210 Lux 17,5x60x45
  • BZ327210

Modular Devices

TIMERS FOR STAIRCASE LIGHTING, VOWA

FUNCTIONS

Electronic staircase lighting timer with switch-off warning. The control input allows the connection of pushbuttons with a total glow lamp load up to 100mA and enables the application in 3-or 4-wire circuits. The unit can be retriggered via the connected pushbuttons. A long keypress will switch off the light (energy saving function). A fast sequence of pushes (pumping) will extend the period to a multiple of the selected value. Depending upon distinct type, the following operating methods can be selected by the controls on the unit:

TW – Automatic timer with switch-off warning
T – Automatic timer without switch-off warning
1 – Steady light (ON)
0 – Switch-off
P – Impulse switch mode without time function (only for BZ327360)
PN – Impulse switch mode power fail latch (only for BZ327360)

TECHNICAL DATA

1. Time range

Adjustment range
Time 0,5 - 12 min (in function T, TW)

2. Indicators

Green LED U ON: indication of supply voltage
Yellow LED ON/OFF: indication of relay output

3. Mechanical design

Self-extinguishing plastic housing, IP rating IP 40
Mounted on DIN-rail TS 35 according to EN 50022
Mounting position: any
Shockproof terminal connection according to
VBG 4 (PZ1 required), IP rating IP20
Tightening torque: max. 1 Nm
Terminal capacity:
1 x 0.5 to 2.5 mm² with/without multicore cable end
1 x 4 mm² without multicore cable end
2 x 0.5 to 1.5 mm² with/without multicore cable end
2 x 2.5 mm² flexible without multicore cable end

4. Input circuit

Supply voltage: terminals L - N
Nominal voltage: 230 V AC
Tolerance: -15% to +10%
Rated consumption: 2 VA (1,0 W)
Rated frequency: AC 48 to 63 Hz
Duty cycle: 100%
Reset time: 500 ms
Hold-up time: -
Residual ripple for DC: -
Drop out voltage: >30%
Overvoltage category: III (according to IEC 60664-1)
Rated surge voltage: 4kV

5. Output

1 normally open contact: terminals L - 18
Rated voltage: 250 V AC
Switching capacity (distance <5 mm):
10 A continuous current
Switching capacity (distance >5 mm):
16 A continuous current
Start-up peak (20 ms): 80 A
Mechanical life: 30 x 106 operations
Electrical life:
Resistive load: 105 operations at 16 A 250 V
Lamp load: 80.000 operations at 1000 W 250 V

6. Control input B1

Connection not potential free: pushbutton B1-N (3-conductor circuit)
pushbutton B1-L (4-conductor circuit)
Glow lamp load: max. 100 mA parallel to the pushbuttons
Overload prodection: yes, electronic

7. Additional control input BZ327360

Connection: control voltage on terminals C1(+)-C2
Voltage range: 8...230 V AC/DC
Galvanic isolation: yes, basic isolation
Overvoltage category: III (in according with IEC 60664-1)
Rated surge voltage: 4kV

8. Accuracy

Base accuracy: ±5% of maximum scale value
Adjustment accuracy: <15% of maximum scale value
Repedition accuracy: <2%
Voltage influence: -
Temperature influence: ≤1%

9. Ambient conditions

Ambient temperature: -25 to +55 °C
Storage temperature: -25 to +70 °C
Transport temperature: -25 to +70 °C
Relative humidity: 15% to 85%
(in according with IEC 60721-3-3 class 3K3)
Pollution degree: 2, if built-in 3
(in according with IEC 6064-1)

10. Functions

Function automatic timer (T, TW)
After the pushbutton at B1 has been pressed, the output relay R closes (terminals L-18) and the set interval t begins. If the pushbutton is pressed again before the interval t has expired, the interval begins again (restart function complies with EN 60669-2-3). Rapid, multiple pressing of the pushbutton (pumping) adds 2, 3 or more time intervals to extend the time up to 60 min. Prolonged pressure on the button (>2s) aborts the interval running and switches the relay off (energy saving function). In the TW mode the device provides a switch-off warning (in accordance with DIN 180-158-2) by generating short pulses (fl ashing) at 30 s, 15 s and 5 s prior to switch-off.

Operating possibilities at B1 in mode T and TW:
The additional control input C1-C2 can be used in the T and TW modes to control the staircase lighting timer with a voltage of 8 to 230 V AC/DC. This input can be used to start and restart the cycle. It cannot be used for switchoff (energy saving function) or for programming long intervals (pumping).

Impulse switch mode (P), (PN):
In this mode, every keypress toggles the output relay R (fl ip-fl op). In function P, the output relay R remains in offposition,
whenever the supply voltage is applied. In function PN, the output relay R switches into on-position after applying the supply voltage U, if the output relay R was in on-position last before power failure. The output relay R switches into on-position, if a short voltage impulse (<2s) is applied to the additional control input (C1-C2). (central ON) A longer voltage impulse (>2s) opens the output relay R. (central OFF)

TIMERS FOR STAIRCASE LIGHTING, VOWA

DESCRIPTION

  • DIM. (WxHxD) mm
  • ORDER NO.

Staircase timer VOWA

  • 17,5x87x65
  • BZ327350

Staircase timer VOWA-PLUS

  • 17,5x87x65
  • BZ327360

Modular Devices

SOCKET OUTLET WITH EARTH

  • Cable cross-section 1-25 mm2
  • Screw-mounting possible
  • Rated current 10/16 A
  • Rated voltage 250 V AC

DESCRIPTION

  • DIM. (WxHxD) mm
  • ORDER NO.

Socket outlet with earth

  • 52x76x65
  • BZ325000-A

Socket outlet with plug; for french standard

  • 44,5x76x65
  • BZ325001-A

Installation socket outlet, blue, screw terminals

  • 44,5x76x65
  • YY492639

Installation socket outlet, blue, screwless terminals

  • 44,5x76x65
  • YY492637

Modular Devices

BELL TRANSFORMER, SHORT-CIRCUIT PROTECTED

  • Safety transformer with isolated windings
  • Meets EN 61558-1-2-8
  • Rated voltage 230 V 50 Hz
  • Rated output 8, 15, 24, 30 VA
  • Degree of protection IP40
  • 100% operating time
  • Including PTC

INPUT/OUTPUT

  • DIM. (WxHxD) mm
  • ORDER NO.

230 V AC prim./4,8,12 V AC sec., 15 VA

  • 35x85x58
  • BZ326577

230 V AC prim./12,12,24 V AC sec., 30 VA

  • 52x85x58
  • BZ326578

230 V AC prim./12, 24 V AC sec., 63 VA

  • 105x85x65
  • BZ326579

Modular Devices

BELL AND BUZZERS, FOR INSTALLATION IN ENCLOSURE

  • Coil voltage: 12, 230 V AC
  • Power consumption: 4.5 VA
  • Cable cross-section, 10 mm2
  • 75dB
  • Continuous load up to 12h possible

DESCRIPTION/SUPPLY VOLTAGE

  • DIM. (WxHxD) mm
  • ORDER NO.

BELL

  • Bell, 1 MW/230 V AC
    • 17,5x86x67
    • BZ926338
  • Bell, 1 MW/12 V AC
    • 17,5x86x67
    • BZ926351

BUZZER

  • Bell, 1 MW/230 V AC
    • 17,5x86x67
    • BZ926339
  • Bell, 1 MW/12 V AC
    • 17,5x86x67
    • BZ926353

Modular Devices

STABILISED POWER SUPPLIES, INSTALLATION DESIGN TYPE

  • Supply voltage: 230 V AC
  • Frequency range: 48-63 Hz
  • Output voltage: 12 V DC or 24 V DC
  • Power loss: 4 VA
  • Storage temperature: -20 °C to +60 °C
  • Ambient operating temperature: -20 °C to +40 °C
  • Test voltage: 4 kV
  • Degree of protection: IP 20
  • Terminals: 2.5 mm2

CERTIFICATIONS EN 60742

OUTPUT CURRENT/MAX. POWER OUTPUT/ OUTPUT VOLTAGE

  • DIM. (WxHxD) mm
  • ORDER NO.

1,25 A/30 W/24 V DC

  • 51x90x65
  • LP746101

2,5 A/30 W/12 V DC

  • 51x90x65
  • LP7431C2

Modular Devices


MECHANICAL TIME SWITCH, 1 N/O, 24 HR.-PROGRAM

  • Minimum switching interval 30 min.
  • Programming every 30 min.
  • Model BZ 326 450 also available with 150 hr. power reserve
  • Power consumption at 230 V AC: approx. 1 VA
  • AC switching capacity:
    • resistive load (VDE, IEC) 16 A/250 V AC
    • inductive load p.f. 0,6 4 A/250 V AC
    • incandescent lamp load 1000 W
  • Floating output
  • Switching contacts: 1 N/O
  • Protection class/degree of protection: II/IP 20
  • Accuracy: BZ 326 448: synchronized with mains or ± 2,5s/ day at +20° C with BZ 326 450
  • Manual switch: Automatic/Fix ON

Mains-synchronous time switches must not be used when the quality of the mains supply is variable accurracy is dependent on the mains quality.

DESCRIPTION

  • DIM. (WxHxD) mm
  • ORDER NO.

Mechanical time switch, synchronious

  • 17,5x90x68
  • BZ326448

Mechanical time switch, quartz

  • 17,5x90x68
  • BZ326450

Modular Devices


MECHANICAL CHANGEOVER SWITCH, 24-HR PROGRAM

  • Minimum switching interval 30 min.
  • Programming every 30 min.
  • Manual switch: Automatic/Fix ON/fix OFF
  • Power consumption: approx. 1 VA
  • AC switching capacity:
    • resistive load (VDE, IEC) 16 A/250 V AC
    • inductive load p.f. 0,6 4 A/250 V AC
    • incandescent lamp load 1350 W
  • Floating output
  • Switching contacts: 1 C/O
  • Protection class/degree of protection: II/IP 20
  • Accuracy: ± 2,5 s/day at 20° C

Mains-synchronous time switches must not be used when the quality of the mains supply is variable accurracy is dependent on the mains quality.

DESCRIPTION

  • DIM. (WxHxD) mm
  • ORDER NO.

Mechanical time switch, synchronious

  • 52,5x82x68
  • BZ327031

Mechanical time switch, quartz

  • 52,5x82x68
  • BZ327131

Modular Devices


MECHANICAL TIME SWITCH, 24 HR & 7-DAY PROGRAM

  • 150 hr. power reserve
  • Minimum switching interval for 24-hr program (T): 30 mins.
  • Minimum switching interval for 7-day program (W): 3 hrs.
  • Programmable: T every 30 min., W every 3 hrs.
  • T: 1 C/O, W: 1 C/O
  • Power consumption: approx. 1 VA
  • AC switching capacity:
  • resistive load (VDE, IEC) 16 A/250 V AC
  • inductive load p.f. 0,6 4 A/250 V AC
  • incandescent lamp load 1350 W
  • Floating output
  • Switching contacts: 2 C/O
  • Protection class/degree of protection: II/IP 20
  • Accuracy: typ. ± 2,5 s/day at +20° C
  • Manual switch: Automatic/Fix ON/fix OFF

DESCRIPTION

  • DIM. (WxHxD) mm
  • ORDER NO.

Mechanical time switch, quartz

  • 105x82x68
  • BZ326401

Modular Devices

MECHANICAL CHANGEOVER SWITCH, 24-HR PROGRAM FOR SURFACE MOUNT

  • Minimum switching interval 15 min.
  • Programming every 15 min.
  • Switch status indicator

Mains-synchronous time switches must not be used when the quality of the mains supply is variable accurracy is dependent on the mains quality.

DESCRIPTION

  • DIM. (WxHxD) mm
  • ORDER NO.

Mechanical time switch, synchronous

  • 72x102,5x52
  • BZ326424

Mechanical time switch, quartz

  • 72x102,5x52
  • BZ326484

Modular Devices

TWILIGHT SWITCH WITH EXTERNAL SENSOR

  • Light sensor
  • 1 C/O, 1 N/O, or BZ 327711 with 1 N/C
  • Switching status indicator
  • Minimum switching interval 1 min.
  • To the minute programming
  • Switching capacity: 16 A/250 V AC
  • Weekly time switch
  • Power reserve: 3 years
  • Date/time ex works
  • 20 memory locations
  • Captive program
  • Fully-automatic summer& winter time conversion

DESCRIPTION

  • DIM. (WxHxD) mm
  • ORDER NO.

Twilight time switch 5-500 Lux

  • 52,5x82x68
  • BZ327731

Twilight switch 5-500 Lux

  • 17,5x82x68
  • BZ327711

Light sensor

  • 36x85x32
  • BZ326325

Modular Devices

DIGITAL DIN-RAIL TIME SWITCHES

  • Daily and weekly program
  • 50 Memory spaces
  • Automatic summertime/wintertime changeover
  • 10 years running reserve
  • Manual switch: FIX ON/FIX OFF
  • Free weekday block formation
  • Non-volatile memory (EEPROM)

TECHNICAL DATA

  • Advertising signs
  • Street lighting
  • Shop window lighting
  • Home & work environment
  • Devices, motors and pumps control

DESCRIPTION

  • LANGUAGE
  • DIM. (WxHxD) mm
  • ORDER NO.

Digital DIN-rail time switch 1 canal

  • D, GB, F, I, E, P, CZ, NL
  • 35x85x60
  • BZ328371

Digital DIN-rail time switch 2 canal

  • D, GB, F, I, E, P, CZ, NL
  • 35x85x60
  • BZ328372

Digital DIN-rail time switch 1 canal

  • GB, PL,S, N, DK, FIN, L, H
  • 35x85x60
  • BZ328391

Digital DIN-rail time switch 2 canal

  • GB, PL,S, N, DK, FIN, L, H
  • 35x85x60
  • BZ328392

Modular Devices

DIGITAL DIN-RAIL ASTRO TIME SWITCHES

  • ASTRO function
  • Automatic summertime/wintertime changeover
  • 10 years running reserve
  • Manual switch: FIX ON/FIX OFF
  • Free weekday block formation
  • Non-volatile memory (EEPROM)

TECHNICAL DATA

  • Advertising signs
  • Street lighting
  • Shop window lighting

DESCRIPTION

  • LANGUAGE
  • DIM. (WxHxD) mm
  • ORDER NO.

Digital DIN-rail ASTRO time switch 1 canal

  • D, GB, F, I, E, P, CZ, NL
  • 35x85x60
  • BZ328A71

Digital DIN-rail ASTRO time switch 2 canal

  • D, GB, F, I, E, P, CZ, NL
  • 35x85x60
  • BZ328A72

Digital DIN-rail ASTRO time switch 1 canal

  • GB, PL,S, N, DK, FIN, L, H
  • 35x85x60
  • BZ328A91

Digital DIN-rail ASTRO time switch 2 canal

  • GB, PL,S, N, DK, FIN, L, H
  • 35x85x60
  • BZ328A92

Modular Devices

4-CHANNEL 365-DAY TIME SWITCH

  • Power reserve: 6 years
  • 4C/O
  • 365-day switch
  • Date/time ex works
  • Minimum switching interval 1 min.
  • To the minute programming
  • Memory locations: 400
  • Switch between summer and winter time fully automatically
  • PC programming incl. software (in PC set)
  • Transfer with PC set
  • Captive program
  • Impulse/cycle function
  • Switch status indicator
  • AC switching capacity:
    • resistive load (VDE, IEC) 16 A/250 V AC
    • inductive load p.f. 0,6 2,5 A/250 V AC
    • incandescent lamp load 1000 W
  • Floating output
  • Accuracy: ± 1 sec./day at +20° C
  • Manual switch
    • Automatic/pre-selection
    • Fix ON/Fix OFF

DESCRIPTION

  • DIM. (WxHxD) mm
  • ORDER NO.

Digital 4-channel 365-day time switch w/ RF-trans.

  • 107x82x68
  • BZ327664

Modular Devices

MODULAR CONTACTORS 1/2-POLE

  • Modular 1 module wide
  • Technical data according to EN 60 947-4-1; EN 60 947-5-1; VDE 0660
  • Terminal labels according to EN 50011
  • Degree of protection IP 20
  • AC1/230 V: 4,6 kW (20 A)
  • Low-hum (ultra-quiet)

DESCRIPTION

  • DIM. (WxHxD) mm
  • ORDER NO.

1 NO / 230 V

  • 17,7x85x65
  • BZ326471

2 NO / 24 V

  • 17,7x85x65
  • BZ326453

2 NO / 230 V

  • 17,7x85x65
  • BZ326437

1 NO + 1 NC / 24 V

  • 17,7x85x65
  • BZ326421

1 NO + 1 NC / 230 V

  • 17,7x85x65
  • BZ326438

2 NC / 230 V

  • 17,7x85x65
  • BZ326439

Modular Devices

MODULAR CONTACTORS 4-POLE

  • Rated current: 25/40/63 A
  • Technical data according to EN 60 947-4-1; EN 60 947-5-1; VDE 0660
  • Terminal labels according to EN 50011
  • Degree of protection IP 20
  • AC1/230 V: 5,7 (25 A) / 9 (40 A) / 14,3 (63 A) kW
  • AC1/400 V: 17 (25 A) / 27.5 (40 A) / 43 (63 A) kW
  • Low-hum (ultra-quiet)

RATED CURRENT/DESCRIPTION

  • DIM. (WxHxD) mm
  • ORDER NO.

25 A,4 NO / 24 V

  • 35x60,5x64
  • BZ326460

25 A,4 NO / 230 V

  • 35x60,5x64
  • BZ326461

25 A,3 NO + 1 NC / 24 V

  • 35x60,5x64
  • BZ326462

25 A,3 NO + 1 NC / 230 V

  • 35x60,5x64
  • BZ326463

25 A,1 NO + 3 NC / 24 V

  • 35x60,5x64
  • BZ326464

25 A,1 NO + 3 NC / 230 V

  • 35x60,5x64
  • BZ326465

40 A,2 NC + 2 NO / 230 V

  • 52,5x85x65
  • BZ326466

25 A,4 NC / 230 V

  • 35x60,5x64
  • BZ326467

40 A,3 NO / 230 V

  • 52,5x85x65
  • BZ326468

63 A,4 NC / 230 V

  • 52,5x85x65
  • BZ326469

40 A,4 NO / 24 V

  • 52,5x85x65
  • BZ326443

40 A,4 NO / 230 V

  • 52,5x85x65
  • BZ326442

63 A,4 NO / 24 V

  • 52,5x85x65
  • BZ326445

63 A,4 NO / 230 V

  • 52,5x85x65
  • BZ326444

63 A,3 NO + 1 NC / 230 V

  • 52,5x85x65
  • BZ326452

Auxillary contact block 10 A

  • 8,75x85x65
  • BZ326470

Product enquiry and further information

We would be delighted to offer free application advice, technical information on products, free quotations and delivery information.

Name

Telephone

Product enquiry & further information